Super Mini FTTX 2~24 core G657A2 Single Mode Air Blown Fiber Optic Cable

Short Description:

Super Mini Uni-tube Air Blown Cable for Microduct Installation by Air Blowing.

2~24 cores with different types of fibers;

Small diameter, and OD customization;

Suitable for microduct 5/3.5MM;

Light weight;

Long blowing distance


Product Detail

Product Tags

Technical Specifications for Super Mini Uni-tube Air Blown Cable

(ITU-T G.657.A2 Fibers)

Air Blown Super Mini Cable (MINI) is small size, light weight, enhanced surface outer sheath fiber unit designed for blowing into micro tube bundles by air flow. The outer thermoplastic layer provides a high level of protection and excellent installation properties.

It is usually applied in FTTX.

Features and Benefits

* Special complex material loose tube, reduce the shrink of tube in cold temperature.

* Accurate fibre length balance, stable mechanical and temperature performance.

* Particular technique control, prevent sheath form crinkling during installation.

* Structure Innovation in sheath, enhancing the blowing performance.

* Small diameter

* Cost saving

* Network design flexibility

* 5/3.5mm microduct suitable

* Easy to upgrade

Standards

Unless otherwise specified in this specification, all requirements shall be mainly in accordance with the following standard.

Optical fibre …..ITU-T G652, G657, OM1, OM2, OM3, OM4; IEC 60793-2-50

Optical cable ….IEC 60794-5, IEC 60794-1-2

1
111

Technical Index

Cable Type

GYCFXY-XB1.3(MTE + Cable diameter)

MTE2.0

MTE2.3

MTE2.5

MTE2.8

Fibre Count

2~4

6~12

2~12

14~24

Thickness of HDPE sheath

Nominal value:0.20mm, Average value:0.15mm

Nominal Overall Diameter

2.0±0.1mm

2.3±0.1mm

2.5±0.1mm

2.8±0.1mm

Weight

4.0 kg/km

5.0 kg/km

6.0 kg/km

7.0kg/km

Cable Fibre Attenuation

0.35dB/km max @1310nm 0.22dB/km max @1550nm

Max. Tensile Strength

40N

50N

60N

60N

Max. Crushing force

600N/100mm

Min. Bending radius -Static / Dynamic

10 / 20 outer Φ

Temperature

Storage -30~+50℃;Installation-10~+40℃;Operation-20~+50℃

Cable service life (estimate value)

25 years

Blowing Performance

Blowing Tool

Typical blowing length

PLUMETTAZ:PR-140, MiniJet-400 etc.Air pressure : 13bar

Fibres Count

Duct type

3.5/5.0mm

Duct type

5.5/7.0mm

2~12 fibres

800m

1500m

14~24 fibres

/

1500

Mechanical Performance

Item

Testing Method

Testing Results

Specified Value

Tension performance

IEC 60794-1-21-E1

Optical fibre strain

Additional attenuation

Max. Tensile Strength =Short term Allowable tension≈2×(Long term AllowableTension)

Short term:≤0.3%

Long term:≤0.1%

Short term:<0.1 dB,Δα reversible;Long term:Δα ≤0.03 dB

Crush

IEC 60794-1-21-E3

Short term:Δα <0.10 dB, Δα reversible;Long term:Δα ≤0.03 dB;The outer sheath has no visible crack. Short termcrushing force =600 NLong termcrushing force =300 N

Repeated bending

IEC 60794-1-21-E6

After test, Δα ≤0.03 dB;The outer sheath has no visible crack. R=20 outer Φ
Bending load =15N
Bending times =25

Torsion

IEC 60794-1-21-E7

After test, Δα ≤0.03 dB;The outer sheath has no visible crack. Torsion angle=±180º
Torsion load =15N
Torsion times =5

Cable bend

IEC 60794-1-21-E11A

After test, The optical fibre can’t be broken;The outer sheath has no visible crack. R=20 outer Φ10TurnsCycles times =5

All optical testing proceeded at 1550 nm

Environment performance

Item

Testing Method

Testing Results

Temperature cycling

IEC 60794-1-22-F1

Allowable additional attenuation (1550nm)

G.652D

≤0.10 dB/km, Δαreversible;

Water penetration

IEC 60794-1-22-F5B

Water column:1m,3mcable, Period:24 hours

No water leak through the open end of cable

Filling compound flow

IEC 60794-1-22-F16

70℃,Period:24 hours

No compound flow from the cable

Optical Fiber Characteristics

The optical, geometrical, mechanical and environment characteristics of the ITU-T G.657.A2 optical fiber shall be accordance with below table:

Characteristics Specified Values Units
Optical Characteristics
Mode field diameter at 1310nm 8.7±0.6 µm
at 1550nm 9.8 ± 0.8 mm
Attenuation coefficient at 1310nm ≤0.40 dB/km
at 1550nm ≤0.30 dB/km
Zero dispersion wavelength ( λ0) 1300 ~1324 nm
Max zero dispersion slope (S0max) ≤0.092 ps/(nm2·km)
Polarization mode dispersion coefficient(PMDQ ≤0.2
Cut-off wavelength (λcc) ≤1260 nm
Effective group index of refraction (Neff) at 1310nm 1.466
at 1550nm 1.467
Geometric characteristic
Cladding diameter 125.0±1.0 µm
Cladding non-circularity ≤1.0 %
Coating diameter 245.0±10.0 µm
Coating-cladding concentricity error ≤12.0 µm
Coating non-circularity ≤6.0 %
Core-cladding concentricity error ≤0.8 µm
Mechanical characteristic
Curling ≥4 m
Proof stress ≥0.69 GPa
Coating strip force Average value 1.0-5.0 N
Peak value 1.3-8.9 N
Macro bending loss Ф30mm, 10 circles at 1550nm ≤0.03 dB
at 1625nm ≤0.1 dB
Ф20mm, 1 circles at 1550nm ≤0.1 dB
at 1625nm ≤0.2 dB
Ф15mm, 1 circles at 1550nm ≤0.5 dB
at 1625nm ≤1.0 dB

Fiber Color Identification & Sheath Color

The individual fiber shall accordance with standard TIA/EIA-598-A and the color code as below. Fiber Colors 1-12F: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Purple, Pink, Aqua

Fiber Colors 13-24F: with black ring marks at intervals of 100mm.

Sheath color: Green or customized

Cable marking

Unless otherwise required the sheath will be use inkjet marked at intervals of 1m, containing: - Customer name

- Manufacture’s name

- Date of manufacture

- Type and number of fiber cores

- Length marking

- Other requirements

Cable Packing

Plywood drums in plywood pallets

Standard delivery lengths are 2, 4, 6 km with a tolerance of -1%~+3%.

3
4

  • Previous:
  • Next: